The advance of this development is the elimination of the need for cleaning the brazier by the user for the correct operation of the pellet stove. This advance eliminates incidents in stoves such as misfire due to lack of attention from the end user, resulting in greater satisfaction for the final customer.
The technical team of the brand RAVELLI has developed and patented the rotary burner BOOMERANG whose purpose is to increase the comfort of the end user, eliminating the need for daily cleaning of the brazier for the proper functioning of the stove to forced air pellets.
Main advantage: The user does not need to clean the burner NEVER.
It is a burner that guarantees ZERO maintenance and ZERO problems with the pellet. It is what RAVELLI has baptized as the ZERO PHILOSOPHY. The stove performs an integral cleaning of the burner every 6 hours of continuous operation. The cleaning and re-ignition process lasts 11 minutes. During this time the stove continues to heat the hearth, as the casting body of the stove continues to emit heat without any loss of comfort for the user. The stove performs a final cleaning for 6 minutes, consuming all the fuel from the brazier. The stove has a ceramic fast start resistor so that in 5 minutes it starts again and returns to full power operation.
The pellet air stove that can be installed in a private home has the following benefits: it has a cast iron brazier without holes in its bottom, unlike other brands. The burner also has hooks or scrapers.
The stove guarantees permanent operation without the need for daily cleanings of the brazier by the end user. The embers remain in the burner until waste heat is lost and when we start the stove again, before carrying out the initial pellet load, the burner rotates 360º in 2 occasions, as if it were a wheel, completely cleaning the waste from the burner. burner. All the waste falls into the lower ash drawer of the stove. It is very attractive for users who do not want to or can clean the stove daily. It is also especially attractive with low quality pellets, that is to say those pellets that generate scab / stone, because the burner is able to eliminate all the waste by means of the dump. Even when a low quality pellet forms a conglomerate of slag, it always falls by gravity, because it has no point of grip because it does not have holes or holes in its base.
In addition the turning is repeated twice and is accompanied by the effect of lateral hooks that help the removal of the crust by scratching the side walls if any.
More information in www.ravelli.com y www.solartecnik.es
Acreditítate online to visit and know in #Expobiomasa2017 all the news of the sector.
From the 26 to the 29 of September in Feria de Valladolid.